最新商品情報 2013

SCHURTER offers a broad range of high-quality chip fuses, which were developed specially for low-loss and precise overcurrent protection in secondary circuitry. Six different types, available in chip dimensions from 0402 to 1206, offer compact and effective protection in the event of a fault.

The SCHURTER chip fuses are available in a number of different current ratings from 50 mA to 25 A at a rated voltage of up to 125 VAC/VDC. Depending on the version and voltage ratings, a breaking capacity of up to 600 A is reached. Thanks to these impressively high values and variety, these chip fuses can be used in a wide range of applications. Chip fuses are especially suitable for mobile and battery-operated devices in sensor technology and industrial electronics.

SCHURTER chip fuses set themselves apart from comparable products through their extremely precise opening times and minimal power dissipation. In addition, their solid construction makes them especially resistant to vibrations and pulse loads. Furthermore, the SMD contacts, some of which are gold-plated, have a positive influence on the wettability, storage life and electrical quality of the chip fuses.

All SCHURTER chip fuses come with cURus certification. The USI 1206 is additionally VDE-approved, the only chip fuse with this type of certification available in the market. As halogen-free and RoHS-conform fuses, SCHURTER chip fuses can moreover be used for lead-free soldering processes. SCHURTER offers all chip fuses in small, medium and large packaging units, and they are especially attractive for high-volume business on account of very attractive prices.

SCHURTER now offers two appliance inlets in splash-water proofed versions. The appliance inlet 6100-3 with a sealing kit has a protection degree of IP 54, both into the equipment and to the cord connector. The 5707 power entry module with line filter offers IP 65 protection into the equipment as a standard feature. With the optional sealing kit, the coupling to the cable connector is additionally protected to IP 54.

For applications in environments where there is splashing water, SCHURTER offers the two connector types 6100 and 5707 in an newly optional version with a sealing kit which guarantees IP 54 to the cord connectors.

The compact power entry module 5707 contains an appliance inlet C14, fuse holders and either a standard or medical line filter. As a standard feature it is rated to protection class IP 65 into the equipment and thus provides a tight seal against dust and splashes. The component provides seals at the assembly opening, at the screws, the fuse holders and between the connector pins and the connector housing.

With the new additional gasket in the appliance inlet, type 5707 is rated for IP 54 protection between the inlet and the cord connector when it is plugged in. The power entry module is particularly well suited for medical equipment that must routinely be cleaned and disinfected. This includes equipment such as diagnosis, dialysis and infusion units. It is also ideal for commercial applications, for example in beverage machines.

The C14 inlet type 6100-3 is also available with a sealing kit for a protection degree of IP 54 for both into the device as well as the coupling to the cable connector. This is suited for equipment used in outdoor applications, for vehicle charging units, for vehicle diagnostics as well as for ultrasound cleaning or stirring equipment in the laboratories.

Independent testing laboratories have examined and confirmed the reliability of the new sealing kits according to IEC 60529. To ensure the tightness of IP 54 with these sealed versions in actual use, the safety bracket (included in the kit) has to be applied to secure the cord set to the equipment.

SCHURTER is expanding its successful UMF 250 SMD fuse series with nine additional rated currents. With this extension, the series is now complete with rated currents ranging from 500 mA to 10 A. The compact, quick-acting SMD fuse thus provides overcurrent and short circuit protection for an even wider range of applications.

SCHURTER now offers the UMF 250 in a total of 14 rated currents between 500 mA and 10 A. The SMD fuse is well suited for voltages up to 250 VAC and 125 VDC. It features a high breaking capacity of up to 200 A at rated voltage. These features and more make the square-shaped UMF 250 a compact alternative to traditional 5×20 mm cartridge fuses.

The UMF 250 is suited for primary and secondary protection on SMD circuit boards. Applications of the device include, for example, power supplies, medical and lighting equipment as well as electronic devices used in the home and in industry. As a halogen-free fuse that conforms to RoHS, the UMF 250 is compatible with lead-free soldering processes. In addition, it has VDE and cURus approvals. By meeting the internationally recognized IEC 60127-4 standard, the UMF 250 serves as a universal modular fuse (UMF) link for use around the world.

SCHURTER has developed a new 16 A appliance inlet for efficient mounting. Designed for print circuit board mounting, the appliance inlet can be easily sandwiched between split enclosures and tested before it is installed in the equipment. Stabilizing posts provide quick snap-in assembly to the PCB. A version with screw mount stabilizers is also available.

The new IEC appliance inlet GSP4 from SCHURTER offers a compact solution for IEC C20 inlets used in applications where power components are board mounted. Equipped with print circuit board terminals for L, N & E, and a 6.3 x 0.8 mm quick connect or solder tab for additional ground to chassis, the GSP4 can be securely snapped-in or screwed-on to a print circuit board before soldering. This is achieved by means of robust stabilizing posts, which also serve to absorb withdrawal and insertion force. Rear mount styles are also available with or without mounting ears. An optional back-side cover for the appliance inlet is available for protection against accidental contact. The inlet is compatible with V-Lock cordsets. The V-Lock retaining system provides a safe and secure power connection by preventing unintentional disconnection of the power cord from the inlet. The GSP4 can also be delivered in Protection Class II, that is as an IEC C24 type socket. SCHURTER’s GSP2 IEC C14, 10 A model, offers the same advantages and is proven itself on the market over many years.

The GSP4 is approved to IEC 60320 by ENEC and CCC for 16 A / 250 VAC, by UL for 20 A / 250 VAC and by CSA for 18 A / 250 VAC. These appliance inlets are suited for applications according to IEC/EN 60950 and fulfill the enhanced glow-wire test requirements for equipments according to IEC 60335-1. They provide excellent features in power supplies, IT equipment, medical electrical equipment, lighting systems as well as test and measurement systems.